Last Updated on November 17, 2026 by Sam Wood Worker
Board Foot Calculator
Enter each board size. Thickness and width are in inches. This gives an estimate, so check your lumber yard’s own measuring rules.
Quick Answer
A board foot is 144 cubic inches of wood. That is a piece 12 inches wide, 12 inches long and 1 inch thick. To find board feet, multiply thickness (in) × width (in) × length (ft), then divide by 12. Add 10 to 20 percent for waste.
Key Takeaways
- Board feet measure volume, not length.
- Hardwood is often priced per board foot. Dimensional softwood is usually priced per piece.
- Always add a waste allowance for knots, cracks and mistakes.
- Ask your supplier whether they use nominal or actual sizes.
- This tool gives an estimate. Your supplier’s measurement rules are the final word.
Hi, I’m Sam
I’m a woodworking enthusiast, not a professional carpenter or lumber grader. I wrote this guide from standard lumber measuring rules and supplier pricing practices. The calculator does simple math, so the result is only as good as the numbers you enter.
The Board Foot Formula
Thickness (in) × Width (in) × Length (ft) ÷ 12 = Board feet
If your length is in inches, divide it by 12 first to get feet.
Worked Example
You need one board that is 1 inch thick, 6 inches wide and 8 feet long.
1 × 6 × 8 ÷ 12 = 4 board feet
Now say you need five boards like that, and your supplier charges $6.50 per board foot:
- Net: 4 × 5 = 20 bf
- Add 15% waste: 20 × 1.15 = 23 bf
- Cost: 23 × $6.50 = $149.50
Common Sizes at a Glance
| Size (T × W × L) | Board feet |
|---|---|
| 1 × 6 × 8 ft | 4.0 |
| 1 × 8 × 8 ft | 5.3 |
| 1 × 12 × 10 ft | 10.0 |
| 2 × 4 × 8 ft | 5.3 |
| 2 × 6 × 8 ft | 8.0 |
| 2 × 10 × 12 ft | 20.0 |
How Much Waste Should You Add?
Many woodworkers plan for roughly 10 to 20 percent. Use the higher end if you:
- are a beginner and may make cutting mistakes
- are buying rough lumber with knots or checks
- need matching grain across a project
- are cutting many short pieces from long boards
For simple straight cuts in clean boards, the lower end may be enough.
Nominal vs Actual Size
A “2 × 4” is not really 2 inches by 4 inches. The real size is smaller. Yards differ in how they calculate board feet, so ask which measurement your supplier uses. Hardwood is often sold in quarters, where 4/4 means 1 inch rough thickness and 8/4 means 2 inches.
Common Mistakes
- Mixing up inches and feet in the length box.
- Forgetting to multiply by the number of boards.
- Skipping the waste allowance.
- Comparing prices per board foot with prices per piece.
FAQ
How many board feet are in a 2 × 4 × 8?
About 5.3 board feet, using nominal sizes.
How do I turn board feet into square feet?
Square feet = board feet × 12 ÷ thickness in inches. So 10 bf of 1-inch lumber covers about 10 sq ft.
Do I need to calculate board feet for plywood?
Usually not. Plywood is sold by the sheet.
Is the calculator exact?
No. It is an estimate. Check your supplier’s sizes and pricing before you buy.
Why is hardwood priced per board foot?
Hardwood boards come in uneven widths and lengths, so volume gives a fairer price than a per-piece rate.
Before You Buy
Always check your supplier’s measuring rules and any manufacturer instructions for your project. Follow local building requirements where they apply.