Board Feet to Square Feet Calculator: Convert Lumber Easily

Board Feet to Square Feet Calculator

Board feet and square feet only convert if you know the thickness. Choose a direction, enter the amount and pick the thickness. Results are estimates.

Quick Answer

To convert board feet to square feet, divide the board feet by the thickness in inches. For example, 100 board feet of 1-inch lumber covers 100 square feet. If the same lumber is 2 inches thick, it covers 50 square feet. You must know the thickness.

Key Takeaways

  • Square feet = board feet ÷ thickness (inches).
  • Board feet = square feet × thickness (inches).
  • Thicker wood covers less area for the same board feet.
  • Add 10 to 20 percent for waste on most projects.
  • Treat the result as an estimate and check with your supplier.

Why You Can’t Convert Without Thickness

A board foot measures volume. A square foot measures area. To go from volume to area, you need to know how thick the wood is.

One board foot is 1 foot wide, 1 foot long and 1 inch thick. So at 1 inch thick, 1 board foot covers 1 square foot.

The Formulas

Board feet to square feet: square feet = board feet ÷ thickness (in)

Square feet to board feet: board feet = square feet × thickness (in)

Coverage by Thickness

ThicknessSq ft per 1 bfSq ft per 100 bf
3/4 in1.33133.3
1 in (4/4)1.00100.0
1 1/4 in (5/4)0.8080.0
1 1/2 in (6/4)0.6766.7
2 in (8/4)0.5050.0

Worked Examples

Board feet to square feet. You have 100 board feet of 3/4-inch lumber.
100 ÷ 0.75 = 133.3 square feet

Square feet to board feet. You want to cover 200 square feet with 3/4-inch boards and plan for 10 percent waste.

  • 200 × 0.75 = 150 bf
  • 150 × 1.10 = 165 bf to buy

Flooring Note

Flooring is usually sold by the square foot or by the box, not by the board foot. Tongue-and-groove boards also cover less than their full width once they are joined. Use the box coverage printed on the product, and follow the manufacturer’s installation instructions.

Common Mistakes

  • Forgetting thickness or using the wrong one.
  • Multiplying instead of dividing when going from board feet to square feet.
  • Mixing up rough and surfaced thickness.
  • Skipping the waste allowance.

Also check :

Deck Stairs: Guide to Layout, Cutting, and Installation

Deck Material & Board Calculator (Free Online Tool)

Deck Stain Calculator: Estimate How Much Stain You Need

Board Foot Calculator: Find Out How Much Lumber You Need

Linear Feet to Square Feet Calculator: Board Width Converter

FAQ

How many square feet is one board foot?
At 1 inch thick, 1 square foot. At 2 inches thick, 0.5 square foot.

How do I convert square feet to board feet?
Multiply the area in square feet by the thickness in inches.

Why do I need thickness?
Board feet measure volume, and square feet measure area. Thickness connects them.

Can I use this for plywood?
Plywood is sold by the sheet, so it doesn’t usually need board feet.

How much waste should I add?
Many woodworkers plan 10 to 20 percent, depending on the project and lumber quality.

Before You Buy

Check your supplier’s measuring rules and any manufacturer instructions for your project. Follow local building requirements where they apply.

By Sam Wood Worker

Sam is the founder of The Wood Carpenter and a woodworking and decking enthusiast. He creates research-based guides using manufacturer documentation, product specifications, recognized industry resources and practical project information. Facebook | Instagram